Just spent some time building up wiring looms and installing Cruise Control into my E36 328i M-Sport Vert.
All the parts used to come out of an M3 (with SMG) , but I have no idea if they worked or not in the Donor car. I do have the correct 328i Bowden cable hooked up.
Anyways I have checked and double checked the loom connections, and done the install very methodically, with soldered connections, using the Bentley Manual & BMW circuit schematics also.
1st test drive - Cruise would not engage :-( although when i turned on the ignition there was some activity/noise from the actuator.
Before I start sourcing an alternative Cruise Control Module & Actuator would the Cruise Control Module I have require "coding" as its now in a 328i automatic rather than an SMG M3 and come to think of it would the Automatic Transmission Control Module also require coding with respect to the fact that a Cruise Control Module is now present.
Any advice appreciated.