OK my windows need to be inched up otherwise they just go up so far and come back down.
I have removed the door card and greased all the runners and WD40 any moving parts. It is a little better but still comes down towards to the top.
Now I have seen lots of information on parts to replace. The americans seem to think there is a spacer or washer that wears down and causes the regulator and mech to have the incorrect contact causing the window to drop etc.
I have looked for this and cannot see which part to replace?
This is doing this for both sides on my car on the front, I cannot see the passanger motor has gone as this is doing the same so think greasing etc should help this?
Any ideas, tips or hints.
I have looked through the search option, google and youtube. Still not found a proper write up on how to replace these parts etc?
PS it is on a Evo with the one touch window up option.