I've been trying to figure this out - But cannot for the life of me figure it.
What i'm trying to do is the remove the Window Anti-Trap (For which i've posted a How-To on my progress so far). It means swapping the ZKE from my Saloon into Coupe. Everything works as it should, apart from I can't get the passenger window to automatically roll up with the switch. It will roll up if I hold the switch, it'll roll up with the key in the door, and it'll automatically roll up with the alarm.
I've studied the diagrams that TheEnd gave me (http://www.wedophones.com/BMWManualsLead.htm)
Now i've studied the wiring in the Coupe and the wiring in the Saloon, and on both cars, the pins match up the exact same in the connectors from the switch to the input of the ZKE, and they also match from the output of the ZKE to the window motor.
But this is the problem, in the wiring diagrams, for the Coupe, it shows the ZKE for the front windows, and the passenger side Up should be on Pin 9 of the green connector (X1354 ?). But if you scroll down to the 4-door model, it shows Pin 9 should be the Rear passenger door. The diagrams don't show the front windows of the 4-door model ?!?
The switch is 100% working,
So is the wiring between the switch and ZKE, and ZKE to window motor,
The ZKE is 100% too.
If anybody can understand what i've wrote, then please help