I have a 96 p reg e36. I have purchased some lexus (generation 3 rear lights). I unplugged the old original lights and put the lexus ones in problem being every time i turn the ignition on it blows the fuse also my foglamp light lights up on the dash even though they are not on. The only instructions with the light says for all vehicles without check control (buld failure indicator on dashboard) the following mod is reuired to the right hand (drivers side) block connector on the vehicle wiring. See pic 1. It says the two red / blue cables need to be bridged together in order for both tail lights to function correctly. This is due to the fact that some models are fitted with check control.
The only issues being the colour wires and positions vary from their diagram look at pic 2 for my car wiring block
Please help as ive tried linking the two red / blue wires but nothing happens, it must be two other wires that need linking together.