thanks guys I will have a look tomoz at some point hopefully appreciate the step threw
hey guys, that wasnt my problem I have changed both relay and inside bulkhead to no luck but I have noticed somethign else. Under passenger compartment there is the holder with wires everywhere which all seems in and ok except one plug! it could be that it isnt meant to be plugged in but I did take a module of passenger floor thinking it was old wash wipe one I changed. the wires into the plug are of these colours if anyone can help if not I will post a picture? if that any more help.
brow/grey, purple/black, red/black, red (power), purple/grey, black/white, red/blue, blue/yellow, purple/white, green/blue (same as fuel pump) brown, orange, white/blue, brown/purple,
there is also 3 small wires blue, grey, brown
Sorry, not sure at all but does this pic of a 1996 316i wiring give any clue
hi mate have uploaded the picture I took of plug so you have a rough idea
Alarm module plug possibly
Bingo! As the car does not have the alarm anymore and I did not pull this out a module so has nothing to do with why I cant get power to fuel pump fuse. I reckon its something to do with dme as the car wont start at all just keep turning over
Do you have spark at the coils?
And which relays did you change again? was it definitely DME relay and fuel pump relay?
Hi ronnie, was definately both relays I changed checked manual to be doubly sure. there is no spark either, it seems to be the whole starting process is not working as no fuel pump power no spark so am completely stumped
|« Previous Thread | Next Thread »|