alright every one its time i sorted my truck out with some Air.
i have found theses air bags there 150mm wide and travel between 100 and 300mm but the best bit is they have shocks running up the middle and have a 3 bolt plate on top like a BMW. and like every thing on my truck there cheap so i can do this on a budget..
so the simple way is to just make lower brackets and bolt them in and link all 4 pipes to one and just use a bolt in tyre valve on the end and set the ride hight like this or may be 2 valves one for front one for rear.
or more costly and complicated is to put a compressor on bored and an air tank and use electric magnet valves to adjust the height of the car.
now this is where it all gets a bit fussy in my head, fabricating everything is not a problem but wiring up the valves and how to plum them up and where to get them from is holding me back from getting on with this.
i got loads of questions with option 2 its a long list has any one on here got experiences with plumbing up this stuff any help much needed thanks for reading my essay