Sorry for another thread, been raking though the forum to try and find info that could help me but as a last resort here is a little cry for help!
have just done and engine swap in a 96 316i, have instaled a 95 m52 2.8
DME = From 328i
EWS/keys/ rest of the loom mostly untouched from the 316i
Bought a data head from ebay to help me with this, Im able to read info from both DME and EWS, also able to clear error codes turn on fuel pump and things like that. SO i believe that i am "pluged in" Have used the EWS-DME alignment part of the package but st still docent start, throws a ews incorrect password error on the DME error memory. I have also tried setting the ISN number manually: reading it from the DME coding screen and writing it to the EWS, still no luck.
DME coding screen :
And finally the EWS error :
I have kind of hit a brick wall, im not sure if im doing somehting wrong, the ews and dme are not comptable or perhaps the DME is faulty?
I know the EWS and the rest of the car loom is fine as i had a running. the DME and the engine loom are another matter, not seen the engine running...
And help would be great!