when sanding them should i only be sanding the outer plastic bits or the sensor as well
thanks matey but i think i need to man up and try and tackle this one myself. if i F it up ill be sending you a pm lol. going to paint my calipers at the same time too.
reserved a few bits from halfords.
opted for red in the end. if i dont like them they should be easy to repaint.
this may sound a little stupid, but ive also ordered axel stands for added support whilst im cleaning them. where exactly do u place them (never used erm before, what part of the axel)?
guys i cant find the bumper bolts. im finding three bolts but not the two.
for anyone looking for the same info there are three bolts in the boot.. undo them, then undo the clips pins under the footwells (2 each side), and another clip pin under the bumper (1 on each side.) then you can pull the bumper off.
Im stuggling to find these bolts! I can find that theres three on each side but realoem says theyre shock absorber supports! Ive found all the various push pin clip doobies but these bolts are a nightmare. Ive attached some pics. If you could highlight the general area of these bolts or a direction arrow to follow it should save me any more hassle!
Ive actually got small enough hands to have disconnected the wire from the sensor but no amount of swivelling, pushing or pulling the sensor will free it from the bumper. Im wondering how its kept in place?!
|« Previous Thread | Next Thread »|