BMW Forums : BimmerForums banner

E36 328i - Performance cams

8K views 7 replies 6 participants last post by  Juselius 
#1 ·
Hi guys what performance cams do you think are the best for the e36 328. Which cams are better shrick or us m3 cams? All suggestions much appreciated:thumbsup
 
#2 · (Edited)
afaik schrick are meant to be slightly better but can give a lumpy idle. iirc the schrick cams profile is based on the s52 us m3 cams. The oem ones wont affect the idle and are good for 8-12 hp. But a remap is needed to release this full potential. HTH

Have also heard cat cams being recommended but i cant give you any info on these, might be worth looking into?
 
#8 ·
Have anyone got their stock cams machined to higher spec? I got one spare set for my M52B28 and thought if they could be customized.
may need to uprate the valve springs
Upgraided valve springs are recommended even with s52 Us m3/schrick cams. Few guys have complain about not doing it. Engine is usually given higher revs with new cams so old worn valve springs can´t keep up.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top