No, you need the inlet manifold off the 325. As StK said, you can DIY it but much easier to buy the pre-adapted kit.
Hi Sam, i've just worked out where you got your car. If it's the one i'm thinking of you got it off a mate of mine (Nixon).
To mirror what people are saying, to get the most gains from your engine without going down the forced induction route you want;
1. 325 Inlet manifold and throttle body (there is a guy on here- Alpina527 - who does this as a kit) Mod's please let me know if your not happy with me putting up services offered by other forums.
2. DaveF induction kit (again DaveF supplies kits through ebay)
These with a map will give you around +20bhp (CA also do a kit but its not as cheap)
3. Free flowing exhaust - BlueFlame, supersprint, scorpion or Eisennman are good for this
4. U.S spec M3 cams
5. 3.0ltr M3 LSD
6. Lightweight pullies + Fan Delete
Ill let you know when i'm next on the IOW, you'll have to pop out. There are a couple of us meet up on a regular basis over there. The guy that does all the work to my car (who owns a 328 himself) will be out so might be good for you to meet them.
Last edited by Ian S; 16-07-2009 at 12:40. Reason: Removed links to other forums
hello mate and thank you for the info and when you down next then and who do ya know down here then
No probs mate. I know a good few people down there. I lived on the IOW for near 10 years. I used to spend alot of time in Ryde when i was in my teens. Ill let you know when i'm next down and we can meet up.
|« Previous Thread | Next Thread »|