I have just got my Diagnostic software working (thanks to someone on here :thumbsup) and have carried out my first test. I have only just purchased this car so don't really know the fault history, however I have no error lights or EML on my dashboard so at a glance, all seems well.
My first full test came back with this:
Total Diagnose:
DME / DDE diagnosis - Status: ERROR -> read the error memory !
Inst. Cluster dia. - Status: ERROR -> read the error memory !
SIM diagnosis - Status: Module does not respond !
AIRBAG diagnosis - Status: OK
ABS / ASC diagnosis - Status: ERROR -> read the error memory !
BC / MID diagnosis - Status: OK
DWA diagnosis - Status: Module does not respond !
ZKE / ZVM diagnosis - Status: ERROR -> read the error memory !
HKL diagnosis - Status: OK
EGS diagnosis - Status: Module does not respond !
EWS diagnosis - Status: OK
LCM / CCM diagnosis - Status: OK
PDC diagnosis - Status: OK
CVM diagnosis - Status: Module does not respond !
CAS diagnosis - Status: Module does not respond !
ZGM diagnosis - Status: Module does not respond !
RLS diagnosis - Status: Module does not respond !
diagnosis completed
Now this was carried out with the engine off, but ignition in postion 2. Is this correct.
What would you guys recommend? I was thinking of erasing each of the memories and leaving it for a while to see what happens.
My first full test came back with this:
Total Diagnose:
DME / DDE diagnosis - Status: ERROR -> read the error memory !
Inst. Cluster dia. - Status: ERROR -> read the error memory !
SIM diagnosis - Status: Module does not respond !
AIRBAG diagnosis - Status: OK
ABS / ASC diagnosis - Status: ERROR -> read the error memory !
BC / MID diagnosis - Status: OK
DWA diagnosis - Status: Module does not respond !
ZKE / ZVM diagnosis - Status: ERROR -> read the error memory !
HKL diagnosis - Status: OK
EGS diagnosis - Status: Module does not respond !
EWS diagnosis - Status: OK
LCM / CCM diagnosis - Status: OK
PDC diagnosis - Status: OK
CVM diagnosis - Status: Module does not respond !
CAS diagnosis - Status: Module does not respond !
ZGM diagnosis - Status: Module does not respond !
RLS diagnosis - Status: Module does not respond !
diagnosis completed
Now this was carried out with the engine off, but ignition in postion 2. Is this correct.
What would you guys recommend? I was thinking of erasing each of the memories and leaving it for a while to see what happens.