hi guys looking for some help
i have a 96 316 which last year had a new head gasket at a cost of £1000. all was fine till yesterday it blew the top hose off.
today i have taken out the thermostat to see if this was the problem as bottom hose was cold when trying to get it to temp.
once thermostat was removed run to temp but still overheating and both hoses getting rock solid.
have read the posts on correct bleeding i am going to try this tomora
is there anything else i should look for
cheers guys
i have a 96 316 which last year had a new head gasket at a cost of £1000. all was fine till yesterday it blew the top hose off.
today i have taken out the thermostat to see if this was the problem as bottom hose was cold when trying to get it to temp.
once thermostat was removed run to temp but still overheating and both hoses getting rock solid.
have read the posts on correct bleeding i am going to try this tomora
is there anything else i should look for
cheers guys